.170" x .250" LDPE Bonded to .170" x .250" LDPE

ECT's Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification. The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT's Bonded tubing is the leading choice for bladder pump sample tubing. What is a skip-bond?  Also known as an Intermittent Bond, the bond between the two tubes is permanent, but every 6″ there is a 6″ gap where no bond has taken place, thus there is no need for separation or splitting back the tubes wherever a cut is needed. This is ideal when using compression fittings to guarantee a leak proof seal. Also eliminates scrap for cutting different lengths from large spools of bonded tubing. SpecificationsTubing A:Tubing Material: PolyethyleneTubing Type: High Density / HDPETubing Color: NaturalInside Diameter: .17" or 11/64"Outside Diameter: .25" or 1/4"Wall Thickness: .040"Length: 500'Max Pressure: 260 PSI at 72°FTemp Range: -93°F - 184°FHardness, Shore D: 69Tensile Strength: 4,600 PSI Tubing B:Tubing Material: PolyethyleneTubing Type: High Density / HDPETubing Color: BlueInside Diameter: .17" or 11/64"Outside Diameter: .25" or 1/4"Wall Thickness: .040"Length: VariousMax Pressure: 260 PSI at 72°FTemp Range: -93°F - 184°FHardness, Shore D: 69Tensile Strength: 4,600 PSI ApplicationsGroundwater monitoringBladder pump samplingNested vapor linesAir sampling tubesLaboratory applicationsWater processingPFAS and PFOA Testing Approved Note: Additional fractional and metric sizes, custom colors and cut lengths are available and quoted upon request.